JIMA Aluminum
JIMA Aluminum
Add to Cart
Products Item:
YH75 Super Hard aluminum alloy Moulds Plate,Aluminum Mold Plate T651 T652
alloy : YH75;HB:155~165HB
YH75 Aluminum Feature
It's a cold-handling forging alloy with high strength. YH75 is one of the commercial high strength alloys. has corrosion resistance
Application : mould, combination die, mold frame, mechanical arm, fixture
YH75 Chemical Composition
| Range | Si | Fe | Cu | Mn | Mg | Cr | Zn | Each | total | Aluminum |
| Min. | - | - | 1.2 | - | 2.1 | 0.18 | 5.5 | - | - | Remainder |
| Max. | 0.4 | 0.58 | 2.0 | 0.3 | 2.9 | 0.25 | 6.5 | 0.05 | 0.15 |
YH75 Aluminum plate specifications
| Tensile Strength Rm(Mpa) | Yield Strength Rp0.2(Mpa) | Elongation (%) |
| 470~540 | 300~330 | 5~15 |
Specification
| Alloy Series | TypIcial Alloy | Typcial Tempe | Thickness (MM) | Width (MM) | Length (MM) |
| - | YH75 | T651 T652 | 4~12 | 1000~2600 | 2000-24000 |
| - | YH75 | 12~260 | 1000~3800 | 2000~38000 |
Advantage and Service
We always hold available materials in stock in 5000MT, Such as 2 series,5series ,6series and 7series alloy ,Size can be cut into as per request.
So We can provide big support for small quantity and the fast delivery .
Advantage:
1) Strength of super hard aluminum alloy (aluminum alloy strength)
2) Light weight: approx. 3/1 of Steel
3) Suitable for die, die aluminum combination mold, such as repeated disassembly of the load-bearing use
4) Good heat conduction performance (about twice times that of steel)
5) Excellent cutting performance, discharge processability: (about 3 times times the steel)
6) Processing deformation suppression treatment: t651,t652
7) Surface roughness: flat, smooth
8) High precision: plate thickness tolerance fine and width length tolerances can be cut according to customer requirements 9) Flatness: High Leveling
Aluminum alloy Manufacturing Mold characteristics:
1, material uniformity is good: heat treatment technology excellence, products in 300 ℃ thickness (diameter) below, strength, hardness is basically consistent;
2, high surface accuracy, reduce material waste
3, good processing performance: the chemical composition, strength and hardness of the deviation reduced to small, processing to eliminate the ' sticky knife ', ' Breaking knife ' phenomenon;
4, high-speed machining, almost no deformation: perfect pre-tensile (T651) process treatment, completely eliminate internal stress, in processing and stress is not easy to warp, cracking and deformation; 5, material density is good: unique grain refinement process to ensure that there is no Chacon, stripes, bubbles and impurities; 6, high temperature resistance: in 400 ℃ Deformation does not occur in the working environment
